DFI LANPARTY LGA775 Showcase: The 925X-T2 & 875P-T


LANPARTY 925X-T2: Bundle & Specifications

The current flagship in DFI's popular LANPARTY line of enthusiast-class motherboards is the 925X-T2.  This motherboard is powered by the feature-rich Intel 925X chipset, for LGA775 Pentium 4 processors. DFI takes advantage of all of the 925X chipset's inherent capabilities, and they incorporate a few extra features as well, like UV reactive connectors and ports, dual-GigE ethernet, and diagnostic LEDs.  The LANPARTY 925X-T2 also has an impressive assortment of bundled accessories included...

  

Specifications & Features of The LANPARTY 925X-T2
Full-Featured Socket-T Mobo
CPU
_Intel Pentium 4 Prescott processor
_Hyper-Threading Technology
_800MT/s (200MHz) system bus interface
_Socket LGA 775 (LAN Grid Array)

Chipset
_Intel 925X chipset
_Intel 925X Memory Controller Hub (MCH)
_Intel 82801FR I/O Controller Hub (ICH6R)

Memory
_Four 240-pin DDR2 DIMM sockets
_Supports dual channel (128-bit wide) memory interface
_Supports up to 4GB system memory
_Supports DDR2 400 and DDR2 533 DIMMs
_Supports ECC (x8) or non-ECC x8 and x16 DIMMs
_Supports 256Mb and 512Mb DRAM densities
_Supports Performance Acceleration Technology (PAT2)
_Supports unbuffered DIMMs

BIOS
_Award BIOS
_Genie BIOS provides:
- CPU/DRAM overclocking
- CPU/NB/DRAM overvoltage
_4Mbit flash memory

Power Management
_Supports ACPI specification and OS Directed Power Management
_Supports ACPI STR (Suspend to RAM) function
_Wake-On-Events include:
- Wake-On-PS/2 Keyboard/Mouse
- Wake-On-USB Keyboard/Mouse
- Wake-On-Ring (external modem)
- Wake-On-LAN
- RTC timer to power-on the system
_AC power failure recovery

Hardware Monitor
_Monitors CPU/system temperature and overheat alarm
_Monitors 12V/5V/3.3V/Vcore/Vbat/5Vsb/3.3Vsb voltages
_Monitors the speed of the CPU/system fan
_CPU Overheat Protection function monitors CPU temperature and fan during system boot-up - automatic shutdown upon system overheat

Audio
_Azalia audio codec with independent variable sampling rate
_S/PDIF-in/out interface
_8-channel audio output

IDE
_Supports ATA/33, ATA/66 and ATA/100 hard drives
LAN
_Gigabit ethernet controllers - Marvell 88E8053 PCI Express and Marvell 88E8001 PCI
_Full duplex support at both 10 Mbps, 100 Mbps and 1Gbps

Serial ATA with RAID
_Supports four SATA (Serial ATA) interfaces which are compliant with SATA 1.0 specification (1.5Gbps interface)
_Supports RAID 0, RAID 1 and JBOD

IEEE 1394
_Supports two 100/200/400 Mb/sec ports

Rear Panel I/O Ports
_1 mini-DIN-6 PS/2 mouse port
_1 mini-DIN-6 PS/2 keyboard port
_2 S/PDIF RCA jacks (S/PDIF-in and S/PDIF-out)
_Karajan audio card (6 audio jacks)
_1 IEEE 1394 port
_2 RJ45 LAN ports
_6 USB 2.0/1.1 ports

I/O Connectors
_1 connector for 2 additional external USB 2.0/1.1 ports
_1 connector for 1 external IEEE 1394 port
_1 connector for 1 external serial port
_1 front audio connector for external line-out and mic-in jacks
_1 CD-in internal audio connector
_1 S/PDIF connector for optical cable connection
_1 IR connector
_1 CIR connector
_4 Serial ATA connectors
_1 IDE connector
_1 Floppy connector
_2 ATX power supply connectors
_5 fan connectors
_4 diagnostic LEDs
_1 diagnostic LED connector for external 4 diagnostic LEDs display
_EZ touch switches (power switch and reset switch)

Expansion Slots
_1 PCI Express x16 slot
_3 PCI Express x1 slots
_3 PCI slots

Compatibility
_PCI 2.2 and Azalia compliant

PCB
_6 layers, ATX form factor
_24.5cm (9.64") x 30.5cm (12")

  

 

  

Included with the LANPARTY 925X-T2, we found a wide variety of items meant to appeal to LAN gamers who frequently move their systems from one location to another, or just like to show off its internals. Included with the board itself, we found a rounded 80-Wire IDE cable, a single rounded floppy cable and two red SATA cables. We also found a single Dual-SATA-to-Molex power adapter, a case bracket outfitted with a single serial port, and an IDE-to-SATA interface adapter.  There is also a detailed Quick Reference poster and three user's manuals included with the 925X-T2 in addition to a DFI case badge, a large "LANPARTY" decal, and a custom I/O shield. Driver floppies and a driver CD-ROM are also bundled with the board as well, along with a UV reactive cable sleaving kit.  Lastly, DFI included a set of FrontX Multimedia ports, that bring audio, SATA, and USB connectors, and four diagnostic LEDs to the front of a system, and a "PC Transpo" that makes carrying a system and its accessories much easier.  The "PC Transpo" wraps around any tower case, making it much easier to transport between locations.


Tags:  case, LG, OWC, LAN, party, Show, LGA775, showcase, SHO, art, RT, LGA, A7, AR

Related content