Aquagrafx Water Blocks For GTX295 & GTX260
From Aqua Computer comes two new water blocks for NVIDIAs latest offerings to keep them cooled to the max. Designed for the GTX295 and the GTX260s new 55nm GPU
Aquagrafx GTX295
The Aquagrafx GTX295 watercooler will be available just in time for the release of the GTX 295 graphics card. The cooler is a sandwich design to cool both of the cards. The intermediate level is made of Delrin, a lightweight, low-friction, and wear-resistant thermoplastic capable of operating in temperatures in excess of 90 degrees celsius (approximately 200 degrees fahrenheit)
The cooling blocks are made of 99.9% electrolyte copper. With these blocks you have the option of water running parallel or in series through the blocks. So you can choose between high flow and low restriction or better cooling with high flow velocity. In parallel mode you need an additional T-Connector.
Both GPU´s are cooled with high efficient microstructure. Focus was also on low restriction. The threads are G 1/4 and the cooler will be available next week. Materials are copper and delrin.
Aquagrafx GT200b
Also available in about a week will be a block for the newer GTX 260 cards with a 55nm GPU. Blocks will be available for both the new GPU cards aqua-computer. The block is made of 99.9% pure electrolyte copper, as all of our new graphic card coolers are. Height of the cooler is 8 mm resulting in low weight the possibility of a single slot solution. Price will be 89.90 EUR. US pricing not available as of yet.
Materials: copper, stainless steel, plexiglas
Threads: G 1/4 threads.
Aquagrafx GTX295
The Aquagrafx GTX295 watercooler will be available just in time for the release of the GTX 295 graphics card. The cooler is a sandwich design to cool both of the cards. The intermediate level is made of Delrin, a lightweight, low-friction, and wear-resistant thermoplastic capable of operating in temperatures in excess of 90 degrees celsius (approximately 200 degrees fahrenheit)
;)
|
;)
|
The cooling blocks are made of 99.9% electrolyte copper. With these blocks you have the option of water running parallel or in series through the blocks. So you can choose between high flow and low restriction or better cooling with high flow velocity. In parallel mode you need an additional T-Connector.
Both GPU´s are cooled with high efficient microstructure. Focus was also on low restriction. The threads are G 1/4 and the cooler will be available next week. Materials are copper and delrin.
Aquagrafx GT200b
;)
Also available in about a week will be a block for the newer GTX 260 cards with a 55nm GPU. Blocks will be available for both the new GPU cards aqua-computer. The block is made of 99.9% pure electrolyte copper, as all of our new graphic card coolers are. Height of the cooler is 8 mm resulting in low weight the possibility of a single slot solution. Price will be 89.90 EUR. US pricing not available as of yet.
Materials: copper, stainless steel, plexiglas
Threads: G 1/4 threads.
