Thermaltake LANBOX - VF1000BWS
Close Up: Thermaltake LANBOX VF1000BWS - Outside
|
|
The outside of the case is sleek with a molded carry handle and black aluminum finish. The front of the case sports three drive bays, 1-3.5", 1-5.25" and a 7" bay that can be converted to a 5.25" with the bracket included in the package. We know what you're thinking; we'll come back to the 7" bay in a moment. Behind the half round mesh at the lower center of the front bezel is a 90mm blue LED intake fan rated at 1500 RPM.
;)
;)
;)
;)
The lower right area includes power and reset buttons with matching blue and red LEDs respectively. The left side has a headphone and microphone connection along with two USB ports and a single FireWire port. The rear of the cube sports an opening for a full size PSU that had no issues accommodating the Thermaltake Toughpower 750 modular PSU that we used for testing. The system comes with a stock I/O shield along with four PCI slots. The knockouts for the PCI slots are all perforated to ensure that the maximum airflow possible passes through the enclosure.
;)
;)
;)
Adding to the cooling of the LANBOX VF1000BWS are a pair of 60mm case fans mounted below the PSU for rear exhausting of warm case air. Above the four PCI slots is room for a third fan that can also work with a liquid water cooling package by removing the small knockout to act as a tubing pass-through. Thermaltake does include a small edging strip in the retail kit to mask off any sharp edges.
;)
;)
;)
