Are you willing to sacrifice a little data security to squeeze every last drop of performance out of your solid state drive? Intel wants to know.
At PAX Prime 2013, Intel hosted a short hands-on workshop showcasing their latest bleeding edge idea: overclocking SSDs. The demonstration was simple: run an Intel 480GB (6Gb/s SATA) SSD at stock speeds, then overclock the onboard controller, and then overclock the NAND bus frequency to demonstrate the performance improvement that can be achieved.
“The real question,” says Intel’s Product Marketing Manager Kei Kobayashi, “is whether or not we can squeeze enough performance out of the drive to justify the risk versus the reward.”
We used AS SSD Benchmark v1.6 to first run a test of the SSD at standard speeds.
For the final test, we increased the SSD’s onboard microcontroller frequency from its stock 400Mhz speed all the way to 625Mhz. We also left the NAND bus frequency overclocked at 100 Mhz.
This yielded a substantial increase in the 4K-64 (queue depth or 64 simultaneous requests for 4K chunks of data), increasing by roughly 20% from 292.53MB/s (read) and 229.69 MB/s (write) to 347.46MB/s and 288.88 MB/s, respectively.
Currently, this is little more than the technological equivalent of a “concept car” for Intel. It may or may not result in SSD products promising the ability to overclock them. Intel is merely researching the idea while gauging customer interest.
“Until bigger questions are answered at an executive level, it’s just an idea at this point. There is no time table for delivering a product. Obviously, if we were to deliver a product based upon this technology, we would have to be very careful about how it was marketed. For example, do we limit the overclocking to ‘safe’ levels, or do we make it completely unrestricted?” Kobayashi explains.
“Also, on a side note, it doesn’t work with SSDs in a RAID configuration at the moment,” he continues.
Other PAX attendees in the hands-on demo expressed a wide range of feedback. “I’m concerned about the lifespan of the drive; I absolutely would not overclock an SSD,” one stated.
Other PAX attendees expressed varying levels of interest. “I like having better utilities to tweak and overclock,” said one. Yet a third was very enthusiastic for the technology and for Intel: “The ability to overclock an SSD is amazing. Intel has been lagging in the [SSD] market for a long time. It would be nice to see them come to the forefront a little more.”
As Koybayashi stated, however, until larger questions are answered we may or may not see a product line—perhaps a line of SSDs with modest overclocking capabilities, and/or a line of “Extreme” line with unrestricted overclocking?
And even if you could overclock an SSD, would you want to? Is the risk of data loss and/or frying a relatively expensive drive worth the performance gain?
There's somethin' wrong with the world today
I don't know what it is
Something's wrong with our eyes
We're seeing things in a different way
And God knows it ain't His
It sure ain't no surprise
We're livin' on the edge
You can't help yourself from faaaaaaallin... ;)
Editor In Chiefhttp://hothardware.com
I would definitely overclock an SSD!!!!!!!!!! I probably won't keep anything on the drive that I would care to lose most likely all that would go on a backup HDD but my main c: drive running windows would be overclocked! Even if it dies I'd just install windows on a new drive again, not unlike overclocking ram and risking a dimm burning out.
I would do it to a cache drive, that way my data is safe, and I still get better perfomance.
JedediahWilliams:I would do it to a cache drive, that way my data is safe, and I still get better perfomance.
I'll be watching from the sidelines for a while, and I'll be interested to see how it works out for those on the bleeding edge.
Consider that SSDs are in a sealed plastic or metal box without ~any~ airflow to mitigate excess heat. When you turn it up with an OC to the drive, isn't it fair to assume that it will run hotter? Will SSDs take hotter temps without any brain farts?
Most of us know that heat is the 800Lb Gorilla in the room when it comes to computers, and a lot of companies make their living by providing us with solutions to mitigate excess heat from within our PCs. Heat is a huge issue that we just can't ignore.
I'll be interested to see how reliability and longevity is affected in OC'd SSDs, but I would only try it on a drive that means little to me if it gets whacked.
Don't part with your illusions. When they are gone you may still exist, but you have ceased to live.
Thank you for another essential article. Where else could anyone get that kind of information in such a complete way of writing? I have a presentation incoming week, and I am on the lookout for such information.
NEWS TIPS |
This site is intended for informational and entertainment purposes only. The contents are the views and opinion of the author and/or hisassociates. All products and trademarks are the property of their respective owners. All content and graphical elements areCopyright © 1999 - 2013 David Altavilla and HotHardware.com, LLC. All rights reserved. Privacy and Terms