ASUS Xtreme Design Contest Update!

Now this freakin rocks. Man I still haven't even finshed my  project and I am suppose to come up with another and possibly build it within 30 days. I so want to join in the fun on this but I am kinda hesitant since I seriously doubt I would have the time to build it. Let me mull it over if I can come up with a good enough idea. then you know I can't resist something like this. So let me make sure I clear on this. This isn't just strictly a case modding project but more a creative way to use the new features on the ASUS board right? So if our project would include other hardware or electronics then we would be responsible for providing those for the build if we were chosen?

I am starting to hear Rocky music in the background guys. "getting strong now" I think I might really need to give some competiton here.

Bring it!

It's a short cycle build on Stage 2... and dont forget about the holidays, so, dont make it tooo complicated, or at least more complicated than you think you can pull. I am scheduling my modding in 25 days time (as you will likely loose 4-5 days around the Turkey day time vortex...)....

Keep it going everyone!

nelsoncp21:

Now this freakin rocks. Man I still haven't even finshed my  project and I am suppose to come up with another and possibly build it within 30 days. I so want to join in the fun on this but I am kinda hesitant since I seriously doubt I would have the time to build it. Let me mull it over if I can come up with a good enough idea. then you know I can't resist something like this. So let me make sure I clear on this. This isn't just strictly a case modding project but more a creative way to use the new features on the ASUS board right? So if our project would include other hardware or electronics then we would be responsible for providing those for the build if we were chosen?

I am starting to hear Rocky music in the background guys. "getting strong now" I think I might really need to give some competiton here.

Ahh Nelson, I was wondering when you'd pick up on this contest.  It has your name ALL OVER it.  

That's correct.  Asus and the sponsors will provide the base system - motherboard, RAM, CPU, GPU, PSU, SSD for storage, keyboard and mouse.  You guys would do the rest, which is basically a case plus whatever enhancements you want to conjure up!

RyuGTX:

After reading the Rules and the Terms and Conditions, I assume I post my idea in this thread by Nov 4th for the 1st stage?

 

Thanks for the info and for holding this amazing contest!

Correctamundo!

Dave_HH:

RyuGTX:

After reading the Rules and the Terms and Conditions, I assume I post my idea in this thread by Nov 4th for the 1st stage?

 

Thanks for the info and for holding this amazing contest!

Correctamundo!

Thanks for the clarification. This works out great because I can start thinking about it after my midterms this Thursday. I can use the whole weekend to brainstorm and sketch.

I got an idea for a PC gaming all-in-one chair. It would kinda be like a Laz-y boy, except the PC would be housed under your seat, so you'd effectively be sitting on it. 

Open an armrest and a keyboard and mousepad will fold over your lap ala airplane food trays in first class.

The chair would come equipped not with a screen but a projector which can be pointed on any blank wall.

And of course, the PC components will be easily accessed for upgrades or swappability.

Issues to work out:

1. Where to place the projector so it has an unobstructed view.

2. Chair  must recline, but where to house to PC if the reclining mechanism is underneath.

3. Also, would cup holders be a safety hazard.

Of course, I don't think my brother will let me use his projector for the eventual build, so it's wholly impractical. Just getting the juices flowing though!

Playing video games lying down is pretty much THE dream.

I have a bunch of impractical ideas too, don't sweat it, all the geniuses in history got scoffed at.

Well I have given it a little thought. Honestly with the features of this board everything is pretty much done for you. I think I have something though that will enhance the experience. I have to do some more research and see if this is even feasable especially in a 30 day timeframe. It would be so much easier if I could just somehow use my current project for this contest but even that probably wouldn't be done in time. Besides half the fun is coming up with a new idea. Stay tuned. I ain't spillin the beans  yet but I think I gots a good 1 ya'll.

nelsoncp21:

Well I have given it a little thought. Honestly with the features of this board everything is pretty much done for you. I think I have something though that will enhance the experience. I have to do some more research and see if this is even feasable especially in a 30 day timeframe. It would be so much easier if I could just somehow use my current project for this contest but even that probably wouldn't be done in time. Besides half the fun is coming up with a new idea. Stay tuned. I ain't spillin the beans  yet but I think I gots a good 1 ya'll.

Bring it for the team NELSON! 

Is it true that we could have multiple submissions? since I read that in some other forums

Thanks for answering.

made the rules a bit more clear.  hope it helps

well I got mine up.  I guess now I have to actually join facebook which I have been avoiding up until now. One last question. Does the OS come with the gear too or do we have to spring for that? You would think they would include Windows 7 with it to take advantage of some of the features.

nelsoncp21:

well I got mine up.  I guess now I have to actually join facebook which I have been avoiding up until now. One last question. Does the OS come with the gear too or do we have to spring for that? You would think they would include Windows 7 with it to take advantage of some of the features.

Hi Nelson, we're working on fixing your image issue here. Sorry but we've had a rash of forum bugs lately that we're trying to squash.  Stay tuned!

Dave_HH:

nelsoncp21:

well I got mine up.  I guess now I have to actually join facebook which I have been avoiding up until now. One last question. Does the OS come with the gear too or do we have to spring for that? You would think they would include Windows 7 with it to take advantage of some of the features.

 Hi Nelson, we're working on fixing your image issue here. Sorry but we've had a rash of forum bugs lately that we're trying to squash.  Stay tuned!

All fixed!  Images restored!

lol I didn't even realize there was an issue. Thanks though .

So I finally signed up for facebook but I am not seeing what I am suppose to do there. Is there something on ASUS's "official page" that I am suppose to click on. Did I even really have to join facebook for this contest?

Seiryuu (青龍） (aka Azure Dragon)

Concept

The inspiration for this project was Japan. I had a bunch of ideas, but I finally settled on one. I was inspired by this cool Japanese ramen restaurant that I went to a year ago. I wanted to incorporate some of the design elements into a case mod. The only problem was that less than half the case was modded. I figured that if I came up with my own name for a ramen restaurant, so I could draw some ideas from the kanji and its meaning to design the rest of the case. I wanted it to have something to do with my s/n (Ryu), which means dragon. Also, since I like blue and I would probably use it to light up my case, I wanted that in the name too. So I came up with Azure Dragon. This is my xtreme Seiryuu ramen case mod.

Warning: I have no experience with SketchUp and I don't have the time to learn at this moment so excuse the horrible pictures. I just took an existing model and pasted textures over it.

Since this case mod began from being inspired by ramen, I am going to dedicate a whole side panel to ramen. As you can hopefully see in the picture below, I am going to make a small display case so that I can put REAL instant ramen inside. Before I go any further, this ramen place was legit. They didn't use instant ramen in their dishes. Back on topic now.

Since the ramen window looks kind of plain, I'm going to cut a dragon out of the metal I cut out for the window and attach it to the plexi. It will be "floating" in the middle of the plexi; the dragon design will not be touching the metal part of the side panel.

I haven't settled on a dragon design yet, but I kind of like this one so far. I have a better picture (one that I actually took) but it is archeived somewhere. When I went to Japan, I took a picture of it, but I'm too lazy to look for it so I searched online. Anyways, since it isn't set in stone yet. There are a few other Japanese dragon art that I am considering.

On the top of the case, I am basically going to make a static window shutter design. That means it won't open and close. I'm going to do this out of wood. I will have small wooden boards that will be attached at an angle. Then I'm going to place 2 lights/LEDs so they only hit parts of the shutter to create that cool light effect. I want to achieve that gradient like effect with the light.

For the front of the case, I wanted to do something that would add another Japanese element that is more well known. I decided to place a "noren." These are Japanese fabric dividers that are usually seen over doors at the entrance of restaurants. For this case mod, mine will have one slit and the design will most likely be the name of this ramen restaurant, Seiryuu. I would like to learn how to sew one so that it looks nice. I really want to avoid cutting the kanji out of the fabric and just sewing it straight on another piece of fabric. But if I can't get access to good information and the needed resources, I might have to resort that that... As for what I am going to do behind it, that is a "secret" (aka I haven't decided yet). It might just be optical drives or it might be something nicer looking like "shoji" (those doors/walls/dividers made out of rice paper). Maybe I can do a nice metal name plate with a nice glow if I can't make a custom noren.

For the left side of the case, I wanted a window in which you can see the hardware inside. But it is a bit boring, so to make it more interesting, I want to attempt to frost the same dragon design that will be used on the other side panel. This frosted dragon plexi window will be lit up by some blue LEDs. Inside the case, I was thinking about make a tatami mat floor using some cheap imitation tatami (if I can easily find some).

Oh, a little note about the side panels. I don't know what would look better concerning the side should the ramen side panel be on. If I put it on the left side (assuming you are facing the optical drive bays and front panel) the hardware would not be visible. BUT, there would be more room to work with in building a shallow display case for the instant ramen to sit in. OR, I could take the extra step and make the side panels interchangeable. We'll see....

Goals:

The goal of this system was to use materials that are not traditionally used with case modding. I am also aiming for a more contemporary style which I don't usually see these days. With some creativity, I wanted to pull off new things that people never thought of before.

Challenges:

I hope this doesn't hurt my chances, but this is going to be my first mod ever. I know this competition was designed to eventually show off a case mod at CES. So even though I am jumping into the world of modding with no prior experience, I have followed a highly talented online modding community; I have followed work logs; and have learned from them. I plan on making this case mod a reality despite my inexperience.

Allow me to introduce my submission to the Asus xtreme design contest. Good luck!

http://hothardware.com/cs/forums/t/45493.aspx

ottoyu34

hi all i hope this is one of the wining design i have design i give it the name of X design i hope you like it and be wining like all and asus is one of the big company and always had an new  Ideas of the miraculous :) modscases.com

Rules changed, new deadlines:

"Winners will be announced for “Stage I” on http://Facebook.com/ASUSOfficialPage Nov. 13th 2009."

"Stage II:
...

2. Five (5) engaging posters will be selected for special brand-spanking new hardware upgrades Dec. 14th."

from http://www.facebook.com/event.php?eid=315017200108&index=1

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4

Ever since I was young i had a fascination with computers, especially fixing them (both software and hardware). Many of my friends know about my love for computers saying things “Oh Reggie he’s obsessed with computers” or ask my things why you are so fascinated with computers.  I designed this setup just to answer that question. I would love to make people understand what I am saying when I relate to parts of the computer to the human body, showing how many components perform similar functions that human organs do. With this setup I could individually show the complex matrix that is usually hidden away from the average Joe in a “box with some fans”.  I could directly show people what component does what and how it connects with the other through the motherboard. There a certain beauty displaying a passion of ours, computers, as art.

I have been a fan of Asus since I built my first completely custom rig based on an Asus m2n32 deluxe, and quickly found out how incredible this mother board was! After that I was hooked I purchased an Asus laptop (A8js) and numerous other Asus products since then, I feel that the people at Asus engineers such beautiful and functional motherboards that they need to be displayed in a more dramatic fashion than and computer case’s side window.

I would use this Rig for 3D modeling, (masters student in urban design), quite a bit of gaming (my Astarte’s are not gonna blow up their selves), programming, and general tomfoolery that I love to do with computers. The features of the P55 are of course drool worthy to any over clocker like myself and needless to say the rig will be able to handle my gaming and work, simultaneously hehe….

The components of this Rig are:

Antec Quattro 850 Watt PSU

G.Skill TDS series Memory

X’s  2 ASUS GTX260 GPUs

Samsung 128GB SSD drives

Western digital VelociRaptor HD

Intel Core i7-975 Extreme Edition

X’s 2 LG DVD RW drives

Logitech G110 Keyboard

Logitech Wireless Speaker system

Razer Mamba Mouse

X’s 2 ASUS VW246H Black 24" lcd monitors

Custom box with power button, reset button, cardreader, and usb ports.

More images can be found at : http://www.flickr.com/photos/26499918@N06/sets/72157622612651069/

Edit: Ahh! some of my pictures have been truncated please go to the link above to see them in fullest

Edit: 2 link now working correctly

P.S Thanks! for the extension i have been busy all week and though i would miss my dead line!

that looks awesome

you dont HAVE to but it is easier for me to keep track of whos submitted something.  plus it gives you and hothardware more exposure and people can check out your design.

you can post here:

http://www.facebook.com/event.php?eid=315017200108&index=1

Folks, we've update the contest requirements to make it a bit easier and extended the date for Stage 1 as well!  Check out the contest rules above!

XtremeDesign:

lol I didn't even realize there was an issue. Thanks though .

 

 

 

So I finally signed up for facebook but I am not seeing what I am suppose to do there. Is there something on ASUS's "official page" that I am suppose to click on. Did I even really have to join facebook for this contest?

Quote

you dont HAVE to but it is easier for me to keep track of whos submitted something.  plus it gives you and hothardware more exposure and people can check out your design.

you can post here:

http://www.facebook.com/event.php?eid=315017200108&index=1

 

Thanks. I got your message on facebook and posted in the appropriate area. This really is an awesome contest here. Thanks for including HH and it's members in it. Asus has been on the ball for awhile now with some great enthusiats class products. It's good to see ya'll takin care of the little guys.

Normal 0 false false false MicrosoftInternetExplorer4

Goal

The goal for my build is to create the ideal gaming computer for LAN and long session gaming, a computer that is easily transported from one place to another, provide all of the commodities needed for a LAN setting. Not only will the computer only be used for gaming it will also double as a home theatre system.

Use of Hybrid Processor

The Auto Tuning that the Turbo V second processor is perfect for right before a LAN party. To make sure your computer is in top condition for the night and don’t have enough time to tune it yourself, then just throw on the Auto Tuning and keep on getting ready for the night.

The real time O.C. tuning tool will allow crucial O.C. setting changes when you do have the time before a LAN party and during it to boost your computers performance so your computer can easily handle the stress of any game you throw at it.

The Turbo Key is a must have when you also use your computer for school and/or work, when O.C. is not needed. So perfect for when you are getting that midterm essay done for your English class and your buddy calls up for a quick game, just throw the Turbo Key and your off gaming.

The TurboV Remote is perfect for fine in-game adjustments you might have forgotten to make before you started your game or before heading off to the LAN party. Easily change your settings when you need them the most.

Use Hybrid OS

Perfect for when you need to quickly check your gaming forums online and you don’t have the time to fully boot your computer. Easily access the internet to get on top of the newest strategies for your favorite games.

Use of Hybrid Phase

Stability when you need it most in your hardware is when you are overclocking your PC for gaming. The Hybrid Phase gives the PC better power efficiency and stability so it is tuned to the perfect settings for when you start gaming.

Design

The design of this computer is to provide the player with anything that they may need while gaming. Whether it is at a LAN party, or at your own house gaming for an extended amount of time. This would include; but not limited to Food, drink, and whatever an imaginative mind can muster. Also the design requires that it is easily moved from one place to another, and can take the beating from being transported from point A to point B.

As far as the case is concerned I will be fabricating my own out of steel sheet metal. Then depending on the rigidity of the case I may build an internal frame or I may leave it as an exoskeleton case with some mounting brackets inside for the motherboard, PSU, HDD, CD drives, etc. there will be handles on top of the case to provide easy handling when transporting the computer. I will be putting a simple vending mechanism into the case that can dispense a beverage and/or a small snack. Thought the vending mechanism will not be cooled due to space/portability issues. I will be mounting power strips and a wireless router on the side of the case so that when at a LAN party there is no need for the series of ridiculously long extension or Ethernet cables running throughout the house. The router will be able to retreat into the case so that the little antenna will not have the chance of being busted off compromising your wireless signal. The side of the case that usually is not utilized because the motherboard is mounted on it will be used by putting buttons or latches on it so that you can snap a carrying case onto the side of it; providing a nice carrying case for your keyboard, mouse, cords, headphones, or whatever you will need for the LAN part. Liquid cooling is an option depending on how the budget looks when nearing the end of my build because I don’t want to have to throw in some sub-par cooling system because the budget ran out. The hardware used in this build include the Asus p7p55d Premium motherboard, Intel i7 Processor, Antec 850w PSU, G.SKILL RAM and heatsink, two Asus GTX260 video cars, Samsung 128GB SSD drive, and other components I have in my possession are going to be used as well as the items listed above. Now here are some Drawings…

DSC01779.JPG.aspx

DSC01780.JPG.aspx

DSC01781.JPG.aspx