Next Generation Extreme Ultraviolet Chip Manufacturing Process Technology Closer to Reality

rated by 0 users
This post has 3 Replies | 0 Followers

Top 10 Contributor
Posts 26,353
Points 1,191,480
Joined: Sep 2007
ForumsAdministrator
News Posted: Tue, Aug 6 2013 1:46 PM
One of the greatest obstacles standing between chip manufacturers and the pursuit of smaller, faster, processors is the lack of a proper light source. Current chips are etched using a deep ultraviolet wavelength of 193nm, but at a 28nm semiconductor process geometry, we've reached the limits of what a 193nm wavelength is small enough to etch, even when using immersion lithography (in which the chip is immersed in water).

Extreme ultraviolet lithography (EUV) has been pegged as the most likely replacement for current 193nm technology, but repeated problems with ramping EUV have left it stalled on the runway. Now, for the first time, foundry technology developer ASML, which made headlines last year by partnering more closely with Intel and TSMC, believes it has cleared some of the hurdles between it and widespread EUV commercialization. The company predicts EUV technology could be ready for ramp by 2015.

Struggling Towards The Future

Two problems have stymied EUV deployment thus far. The first is the strength of the light source. Generating EUV at the intensities required for mass production can require as much as an order of magnitude more input power than conventional lithography. Second, there's the issue of exposure time. The two are linked -- a higher-power system can etch wafers more quickly, but the power requirements could edge into the kilowatt range for each piece of equipment. The NXE:3300, which ASML is shipping this year, will be capable of hitting 125 wafers per hour, once the company boosts the light source up to 250W. That boost is still off in the future -- current NXE:3300 machines are targeting 80W by the end of the year. 


The ASML NXE:3100 -- the commercial prototype for the NXE:3300 available this year

Even 80W is still a significant improvement from the 55W demonstrated earlier this year, but Intel has recently stated that it needs EUV to be capable of 1000W of source power to hit all its production targets. EUV lithography also requires the use of a vacuum chamber under strictly controlled lighting conditions and near-perfect silicon -- even the smallest irregularities can throw off the etching process send defect density spiraling out of control.

ASML hopes to have EUV ready for production by 2015, because that's when the machines would need to be installed in order to be ready for the 10nm node. Thus far, designers have stretched traditional 193nm lithography by using what's called double patterning. Instead of doing a single exposure and etching an entire surface at once, two different masks -- think of these as stencils -- are laid across the surface and etched independently. The problem with double patterning is that masks must be aligned to nearly impossible tolerances in order to ensure chip features are etched accurately. In theory, more masks could be added, but each additional mask increases manufacturing time, drives up cost, and increases the likelihood of chip-killing defect densities.

If ASML's roadmap pans out, the company should be able to deliver commercial EUV hardware capable of handling some conventional lithography tasks by the time the 10nm node is ready, though no one is talking about hitting Intel's required 1000W source by that time. Having a roadmap to even 250W is a major accomplishment, but there's still a long way to go before EUV is ready for widespread deployment. Still, the technology should be ready to assist by the time it's needed, even if the full deployment schedule isn't known yet.
  • | Post Points: 50
Top 200 Contributor
Posts 354
Points 3,075
Joined: Aug 2012
Location: Canada

It's amazing how much goes into processors... Time, money, brain power... The quest for more powerful chips has directly contributed to major milestones, and it's kind of cool to think about

PC Specs:

  • AMD Athlon 64 x2 6400+  Cooled by a Cooler Master Hyper 212 Plus (push-pull)
  • 2GB DDR2
  • MSI Radeon HD 6450 2GB
  • Stock Dell motherboard
  • 250Gb HDD
  • XFX Pro Core edition 650W PSU
  • Stock Dell inspiron case

 

  • | Post Points: 5
Not Ranked
Posts 7
Points 50
Joined: Apr 2013

I love the Semi world. Good is never enough. To meet the requirements of the future CPUs requires the technology of manufacturing to increase even more dramatically. The next phase may move to electron etching instead of photon etching.

  • | Post Points: 5
Not Ranked
Posts 1
Points 5
Joined: Aug 2013

There is an alternative technology for the production of EUV light at lithography power levels. Zplasma Stable DPP uses Sheared Flow Stabilization to stabilize the EUV-emitting plasma. Stable plasma results in light pulses that are 10-100 times longer than than those produced by the unstable plasmas of other sources. The source uses no tin and has a controlled end to each pulse that does not produce the high-energy debris and molten tin sputtering that have been obstacles for other light sources. We have prototyped and demonstrated the physics of Stable DPP in the lab. Zplasma is seeking funding and development partners to scale our prototype up to the 200 watt light source the industry needs.

  • | Post Points: 5
Page 1 of 1 (4 items) | RSS