When we published our comprehensive P55 motherboard roundup back in early April, one of the boards we discussed and really liked was the Asus P7P55D Deluxe. At $220, that particular board was priced significantly higher than some of the other LGA1156 options we considered. Fast forward a few months and we've got the LGA1156-based P7P55D-E Pro on the table. Its MSRP is considerably lower than the P7P55D Deluxe's ($179.99 vs. $219), and it offers features like USB 3.0 and SATA 6G, both of which aren't available on the other board. The P7P55D-E Pro's features and price make it an attractive option, but does it stand up against the newer LGA1156 boards from other manufacturers? Let's find out...
Asus LGA1156 P7P55D-E Pro Motherboard Review
ASUS P7P55D-E Pro
The price of that board (and the Quad LGA1156 chips) is why I never understood getting one of these. Paying nearly $400 for this board and an i5-760 (to make it clock for clock, a 750 will save you $10) is kinda crazy when you can get an i7-930 with x58 mobo for +$100 or less.
A little extra memory bandwidth, the ability to run two full speed x16 PCI-e slots if you want XFire/SLI, and a much more powerful upgrade path.As a side note, what is up with the crazy number of Micro ATX x58 boards out there?
Smooth Creations LANShark "Blue Flame" + ASUS G73JH-A2 + ASUS EeePC S101H
"I frag therefore I am!"
Not sure I undestand the calculation here. This board retails for $179. Also, did you factor in RAM?
Editor In Chiefhttp://hothardware.com
Dave,I was doing board + cpu, with a quad core cpu required. The cheapest I could find the 760 for was around $210, so about $390 for it and this board. Just shy of $400 as I said, depending on if you get free shipping or not. You can get a X58 board from $160+ and a i7-930 for $280. That is $440 at the cheapest, though I would take one of the better outfitted boards and why I said a $80 difference. I didn't include ram because your going to pay roughly the same between the boards for total amount of ram.My point was this board is nice, but I'm not going to buy or recommend a high end board for the core cpus unless it is for the 9XX series. This ones price is thankfully lower then a lot of 1156 high end boards, but I never understood paying more for something that is a tier or two down from the top end.
Correct me if I am wrong but the 1156 processors have an integrated memory controller. Now assuming this is correct how does your memory tests work with this MB, the only thing I can see is power and the bus that would have a direct impact on the stability, not much to do with anything else as the rest is pretty much CPU bound.
Archer:the rest is pretty much CPU bound
It all goes to the motherboard and RAM that you use. Yes, 1156 socket based CPU's have the memory and the PCI-E controller on the CPU itself, (so it's a standard across the platform) but some motherboards seem to be able to squeeze just a little more performance out of the system as a whole. Maybe it's the way that the board is designed that makes a difference. Some boards use higher quality parts on them when they build them, such as Japanese Solid Capacitors, and Heavier Copper PCB's to name a few. The design of the power handling circuitry makes a huge difference too.
I had had good luck with an ASRock board, the P55-Pro, with a i5-750 in it. It's easy to setup and tweak too. My Intel DP55KG Extreme mainboard with the i7-870 is a good one too.
Don't part with your illusions. When they are gone you may still exist, but you have ceased to live.
As to my $99.00 ASRock P55-Pro Mainboard,.....I just became aware of a new BIOS that's been released for it. So I downloaded it and installed it. Looking it over, I found an "Auto-Tweak" function that overclocks the board and components for you. You do nothing, set nothing, it does it all. So I thought I would try it out to see how it worked.
Below is a picture of my latest run of the Final Fantasy Benchmark. Note the default speed of the CPU and to the right look at what it's running smoothly at.
Getting 3.8GHz. from my 2.67GHz CPU works for me. Not bad at all for a $99.00 board!
NEWS TIPS |
This site is intended for informational and entertainment purposes only. The contents are the views and opinion of the author and/or hisassociates. All products and trademarks are the property of their respective owners. All content and graphical elements areCopyright © 1999 - 2014 David Altavilla and HotHardware.com, LLC. All rights reserved. Privacy and Terms