I read an article in Fast Company recently about a program called World Community Grid, which seems to be a program similar to folding@home. I have a few PC's lookin for work, and this seems to be just the job for them.
Could anyone point me in the right direction to get me started?
Does folding@home rely on CPU or GPU?
Does this program run in the background? (Might keep it off of my main rig if it is too memory intensive)
What are the hardware requirements?
Excuse me if these questions are answered elsewhere.
i7 950 - ASUS Rampage 3 Extreme - ASUS GTX 570 - AZZA Hurricane - 6 GB Corsair 1600 - Corsair AX750 - WD 1tb black Thank You HH!!!!!!
AMD 1090T - MSI 890FXA-GD70 - XFX HD5850 x2 - CM Storm Scout - 8GB Kingston HyperX 1600 - Corsair HX850 - Sammy spinpoint f3
Folding@home has a regular client for the CPU but a special high-performance client for dual-core CPU's and GPU's. So it relies on both but only depending on the version.
I don't know if this program runs in the background but you might as well snoop around and check to see if it does.
"The future starts with you; now start posting more!"
Technically any computer can do the work, the only problem is that there are deadlines to be met and if your computer is slower then the data you worked on will just be discarded because its late. (recommended at least a core 2 duo or better). GPU wise Nvidia cards have an advantage as the work output you get from the nvidia cards are much higher, AFAIK its still not very optimized for the ATI cards and the work output isn't as good as Nvidia's. The client can run in the background and utilize unused CPU work (idling, etc). IIRC you can adjust it. Also it can get stressful to your power supply (a dedicated folding machine can use up a lot of electricity).
I was able to run 8 instances of the CPU client on my Quad core with hyperthreading with some customization. I specified each instance to a specific core.
Then I also ran 2 instances of the GPU client and specified it to a specific GPU.
It takes a little customization but once it's done, you make a batch files to run them all at once. I turned my rig into a folding beast lol
It's supposed to run in the background and other apps will take priority. You still might see some delay tho. Try it out and see if the performance impacts your computer too much or not.
With a Core i7 920 you really should be using the Windows SMP client with a passkey to get the bonus points. Also if it is overclocked you could run the -bigadv work units which can give upwards of 60,000 points.
You can use your CPU and/or GPU for folding@home.It can be set to run in the background as a service and requires little memory.There aren't any hardware requirements unless you run the GPU client.
Your GTX295 should be able to run two GPU clients, and One Windows SMP client for your 920.
finally just installed this. Acarzt, how did you run multiple instances? I am going to wait until my HD5850 gets back from RMA before I install the GPU client.
The easiest way is to make another folder that contains all the needed file for folding.
This guide should help: http://forum.xcpus.com/f91/guide-running-client-multiple-nv-gpus-12627.html
I downloaded one of the multi core clients but when I would run it, i noticed it wasnt putting my CPU at full load.
So what I did was.. I made a folder on my desktop and placd 8 shortcuts in the folder all leading to the exe file of the application. Number your shortcuts 1-8 (or however many cores/threads you have)
My CPU can run 8 threads at once so I had 8 shortcuts. Right-click and click properties of each shortcut. In the target line enter C:\Windows\System32\cmd.exe /C START " " /affinity 1 at the beginning of the shortcut so it should look like this
C:\Windows\System32\cmd.exe /C START " " /affinity 1 "c:\program files\whatever\Program.exe"
Change the number on each shortcut 1-8 to assign 1 instance to each core.
I don't remember if I used the single core or multi-core client for this tho lol So you might have to do a little experimentation. But using this method I was able to acheive 100% CPU usage.
I did the same thing with the GPU, assigning each instance to a specif GPU. But the syntax is different so just let me know if you ever need that as well.
It's been a LONG time since I had this setup. So if you run into issues, let me know and i'll do what I can to help you figure it out :-)
The SMP client is multi-threaded so you should really only need to run one client window especially if you are running SMP2 WUs; if one client alone doesn't put a 100% load on your CPU you can run two clients and set the affinity of each to -smp 4.
Scroll down to Windows: V6 Beta SMP2/CPU clients and get the 6.29 beta for MPICH (32-bit or 64-bit)
Here is an excellent setup guide which should help: http://www.evga.com/forumsarchive/tm.asp?m=503846
A Core i7 920 running at stock speeds will get up to 10,000 points per day depending on the work unit. You'll need a passkey to get bonus points: http://fah-web.stanford.edu/cgi-bin/getpasskey.py
Definitely more productive than running 8 single core clients.
I really don't remember what kind of points I was racking up. I remember it being a lot tho. But I had my GTX295 heping out too.
Thank you guys for all the help. Got my first WU earlier today. Now that I kind of understand this stuff, im going to start with the multiple core stuff/ SMP client later
Making any progress? Also I forgot I uploaded a pic of me folding lol
100% CPU usage and check out how many clients are running in the bottom right lol (click pic to see it bigger if you want)
have 3 clients up, 2 on this computer and one on the HTPC. I have been workin like a slave all week, and have not had a chance to mess with this much more. I want to see if I can get my Phenom II 1090T to 100%, though, and see what kind of WU's it can crank out.
Those 6 core AMD's are getting 11,000 - 12000 ppd with the Windows SMP client when overclocked.
I havn't tried the SMP yet. Just figured out the multiple clients thing( I think).
While looking through the team page I noticed theres not too much activity, so sorry if all this is old news.
And heres the HTPC
This is a AMD Phenom II 710. For some reason, Sometimes when I run this computer it only uses one core. I think it switches from 3 to 1 every other time the computer boots. Weird.
You can check to make sure the affinity setting are working properly by clicking on the processes tab in Task manager and right-click one of the Folding instance and click set affinity. If it's working right only the one CPU you designated should be checked.
If it's not working... post what you have written in the target line for your shortcuts and we'll see if we can figure it out :-)
Thanks for all the help.
When I right-click and set affinity, I get:
"The operation could not be completed
Access is denied"
not sure what is causing this, any ideas?
Perhaps you do no have full admin rights
Go to control panel, user accounts and see what kind of account you're using.
I use Process Lasso: http://www.bitsum.com/prolasso.php
Download the 32bit of 64bit version corresponding to your operating system. Once installed it's simply a matter of right clicking the app you wish to set affinity and priority for.Set the defaults so you won't have to do it after a reboot.
Thanks for the link, that worked.
Do you have the full version of process lasso? Just wondering if the trial version would run out or not, because I am leaving town tomorow and was going to fold while Im gone.
I use PriFinitty when I want to set the CPU affinity when folding. Give it a try, its freeware.
nice, tried PriFinitty on 2nd machine.
Anyway goin backpacking now for a week, thanks everyone who helped me out with this stuff, probably could have looked it up on the forum, but theres a core i7 at stake here...
lol, no problem man. Enjoy your trip!
And don't forget to bring us back some pictures!
No, I use the trial version of Process Lasso and it does not expire. You'll get a popup on Windows bootup telling you you've been using it for blank number of days but it does not expire.
Just started messing around with the smp. Norton Sonar kept deleting fahcore_a3 over and over again until I disabled it...
The SMP client takes cpu load right up to 100, gonna work with this for awhile and see what happens, and If I can get it to work with Norton.
Just another question about the individual core clients...
When I had 5 fahcore_78's running, each time One would finish a WU and restart, the affinity would go back to 0-5. I had tried to set the default affinity, but the problem is that all 5 processes had the same name, so each one would default to the same core. Did anyone else have this problem?
I don't think there is a way around that. As you say each of the 5 fahcore_78 instances had the same name so I don't think there is a way to set each one up to use a specific core and not have the affinity change when a new work unit begins.
NEWS TIPS |
This site is intended for informational and entertainment purposes only. The contents are the views and opinion of the author and/or hisassociates. All products and trademarks are the property of their respective owners. All content and graphical elements areCopyright © 1999 - 2014 David Altavilla and HotHardware.com, LLC. All rights reserved. Privacy and Terms