The contest and
Earlier this month, ASUS Computer
created a contest called “ASUS Xtreme Design”,
calling on computer enthusiasts
to showcase their concepts on what kind of unique systems they could imagine
leveraging ASUS main components
and their accompanying technologies to their advantage.
20 winners were chosen from phase
1 (concept phase).
I was chosen as one of the 20
winners of the concept phase.
Now begins phase 2 (build phase)
of the contest,
where the other 19 winners and I
are building their systems with the components provided by ASUS and the other
this is to thank and showcase the
ASUS, First and foremost, for
putting on the contest:
ASUS P7P55D Premium
A very sexy looking motherboard
(MOSFET heatsinks look awesome),
including full speed SATA 6Gbps
ports, 32 phase CPU power design (!),
Fan Xpert (motherboard fan
control, 1xPWM, 2x voltage control),
integrated ExpressSSD for
internet access almost instantly/without booting to Windows,
hybrid power management, autotune
overclocking , external overclocking remote.
ASUS Nvidia GTX260 GL+ (55nm
Core 216) video card-
This card uses a GTX275 PCB,
newer 55nm GPU fabrication process, and non-reference “copper core” fan.
I will be swapping out the
included HSF for a full cover water block, detailed later.
Intel Core i7-860 CPU-
Latest LGA 1156 socket,
Hyperthreading for more CPU efficiency in many programs,
more turbo boost and less power
consumption than the Core i7-900 series.
Comes with a woefully inadequate
fan in retail boxed version
(picture compares E8xxx Core 2
Duo to Core i7-860 HSF)..
I do like the smaller/less bulky
retail box though, seems more efficient, even in packaging ;).
Stock HSF will be replaced with a
water block for better cooling performance under overclocking conditions,
as well as more freedom in system
packaging (no tall “tower” air HSF to deal with.
G.Skill 4GB (2 x 2GB) DDR3-2133-
Since LGA 1156 only supports dual
channel DDR3 memory, (LGA 1366 supports triple channel),
the 2133Mhz transfer speed will
provide plenty of memory bandwidth to feed data to the hungry 8-threaded CPU
with Intel turbo boost.
This memory kit comes with some
nice looking heatspreaders and a dedicated fan to cool the memory.
I won’t be utilizing the fan for
a couple reasons- I don’t think DDR3 gets hot enough to require both a fan and
I will have enough case airflow
blasting the memory to keep it cool enough anyways, and my case design is
already fairly limited on internal volume.
Samsung 128GB SSD-
Extreme disk access speed, both in sequential
throughput and random accesses.
Faster boot times, faster game
and program load times, but trade off in total storage space.
In the computer storage
hierarchy, it is in between DRAM and magnetic disk platter (HDD);
SSD access is faster than HDD,
but more expensive per GB than HD...
DRAM is even faster access than
SSD, but more expensive per GB than SSD.
I will include some other SSDs or
possibly a HDD in my system for more mass storage space.
Antec Quattro 850W Power
850watts, 80+ bronze efficiency
rating, nice looking black and yellow “race car” stripes/number paint design,
modular cables to reduce clutter
and thereby improve airflow (essential for a small case design as mine).
What’s not to like?
This PSU only has an 80mm cooling
fan on the rear, and intake ports on the front,
unlike many power supplies that
now have a 120+mm fan on the bottom of the PSU and vents on the rear.
This could be a good or bad thing
for your case airflow, depending on how yours is designed.
Note that the smaller fan is not
an indicator of less power, but rather greater efficiency.
A large portion of the PSU
interior is taken up by a massive heatsink to cool the interior components.
Because of this large heatsink,
this PSU is also notably longer than a standard ATX power supply,
so be aware of the extra length
clearance required, if you are considering it for your build.
Razer Lycosa Keyboard and mouse-
For the gaming community we have
an 1800 dpi mouse, and a nice keyboard to match.
Keyboard has some tack to the
keys, to help your fingers “grip” the keys and not slide around on the key
Keyboard has short throw keys
like a laptop keyboard, but the action feels very precise.
Keyboard also includes USB port
and audio connectors on the back side of the keyboard, a nice convenience if
your case is sitting on the floor or more than arm’s reach away from you.
Mouse is very accurate and has
the same “tack” feel as the keyboard.
Lots of black.
The parts arrive! The 30 day
build timeline has started!
Here is a summary of my design
My design concept is to build a
small form factor gaming system for use in a Home theater environment, to
maximize portability and minimize wasted space, without giving up expansion or
Here were my design requirements:
1. Keep components cool and system stable 24/7/365, even while
2. Keep the whole system quiet, to allow for use in a home
3. Design to allow future upgradability.
4. Minimize wasted space. I don’t need 5x DVD-ROMs, 8x 3.5” HDD,
etc,. Plus a massive “box” wouldn’t look good next to modern consumer
electronics- LCD or Plasma TV, Home theater surround sound amplifier, etc,.
Here is my concept design,
dimensions are: 400mm x 319mm x 146mm
Using 3/16” thickness acrylic for
Watercooling for CPU and GPU in a
single loop with 240mm radiator.
PSU mounting above CPU area,
since this is a water cooling-only case, I don’t need any clearance for HSF.
This does require 90 degree elbow
fittings into and out of the CPU water block, though.
Another system build primary sponsor!
UPDATE: 12/02/2009; Another primary
Got this package in the mail last night:
I am proud to announce that
"Manufacturer of the world's best active coolers",
has signed on as a primary sponsor for my
Here are some more parts they have provided, starting with
the ultimate in performance CPU water blocks on the market today!!
Unveiled only two months ago, the
Apogee XT has set a new standard in water cooling CPU block
review for more information)
Comes with 2 1/2" ID chrome barb fittings, reusable
hose clamps, multiple CPU brackets (LGA 1156, LGA 1366), an unlabeled TIM
(heatsink thermal grease).
It also has a nice "X" shape to it, for Xtreme
design competition build ;)
And damn.. it just looks absolutely dead sexy all by
Uses spring loaded screws and a stiff stamped metal back
The black, silver, and pewter color of the block goes well
with most any system/motherboard color scheme, very classy.
No clearance issues anywhere.
Now to put some cold water on that power hungry
and hot GT200b GPU in the ASUS GTX260 GL+ (core 216),
we have the
series GTX275-P897 full cover GPU waterblock.
Since the GTX260 (55nm "Core 216") often shares
the same PCB as the GTX275,
This block will fit the GTX260 55nm, assuming the video card
manufacturer uses the NVIDIA reference PCB design for GTX275,
labeled "P897" on the back (and not one of the
video card company's own PCB designs).
More black and chrome sexiness!
Comes with the 1/2" and 3/8" chrome plated barb
fittings (two of each size!), reusable hose clamps, the same unlabeled TIM as
the CPU block.
Preapplied thermal tape pads (dark gray strips) for the
critical components, a nice touch..
Some other GPU blocks require you to cut and place your own
thermal pads and stick them on the block manually.
Swiftech has done this already for you.
ASUS has used a slightly modified version of the NVIDIA
reference PCB on the ASUS GTX260 GL+, so I will have to use a mill to take some
material out for component clearances.
You can bet I'm gonna be measuring 20x for every little mill
..I can detail this later if anyone has interest,
basically its the caps around the voltage regulators on the
right side of the PCB and the caps on the upper left of the PCB.
Next up, the high performance
Since I am working in a limited space, I need a low
profile/small footprint, high performance pump.
The MCP350 will provide high pump pressure to maximize
liquid flow through my tubing and cooling blocks, while keeping a very low
profile and minimal noise.
The pump comes with a molex connector for power from your
as well as a 3-pin fan header (with the single blue wire) to
connect to your motherboard or fan controller.
This allows your to monitor your pump to make sure it is
or sound an alert/alarm if it is not spinning.
Swiftech also has a higher performance version,
Next we have the MCR220
QP "Quiet Power" Radiator.
4x 120mm fan locations, nice built in plenum for better fan
Bang for your buck, there isn't much better than this series
They also have a stackable version and a integrated
Last but not least, we have the MCRES
Micro Rev2 micro reservoir.
Again, since size being a big issue for my build, this fits
my build perfectly. Thin small footprint can be mounted in various fashions,
with 3 ports of the bottom to allow for various inlet/outlet configurations,
and another port on the top for a fill/vent to the reservoir.
Comes with multiple mounting brackets and screws for
mounting however you want it (and sticky back velcro for temporary mounting options),
4 black plastic barb fittings (3/8" and 1/2" ID tubing), reusable
hose clamps, even includes spare o-rings.
So that's it for the shiny parts pictures, time for the real
Many thanks to Gabe and Michelle at Swiftech, they
are a quality company with great customer service.
So here's my bench testing setup. Since my last update I have added:
ASUS P7P55D Premium breaks through 650 MB/sec read speeds!
:cool:Thanks to the exclusive ASUS P7P55D Premium motherboard's onboard 6Gbps controller and an onboard RAID setup, the World's first SATA 6Gb/s motherboard,my Xtreme Design system has broken through 650 MB/sec read speeds, as measured in ATTO Disk Benchmark.Note that this is achieved without use of external RAID controllers, only the onboard controller.
Thanks to the exclusive ASUS Hybrid Processor technology,I was able to overclock the system to a very stable and strong overclock @ 4.0 GHz,while keeping my system very cool under load and at idle.The ASUS Hybrid Phase technology keeps the power consumption down at idle,and provides a very stable vCore for the CPU voltage level, resulting in an awesomely stable overclock at lower voltage than required on other boards. The ASUS EPU6 Software undervolts the CPU and reduces its speed automatically at idle,reducing idle temperatures and power consumption even more than any other solution!This screenshot shows the system running full tilt, with the system running CPU @ 4Ghz, GPU @ 750Mhz, stressed processor and GPU with Prime95 (8 threads, hyperthreading enabled), and Furmark for GPU stress.23 deg C ambient temperature.After 45 minutes:CPU stays solid at a safe 80 deg C, while the GPU stays at a relatively chilly 54 deg C.Thanks to ASUS and my water cooling sponsor SWIFTECH,for their absolutely outstanding and efficient products! Here is another screenshot of temperatures, after idling for 30 mintues or so:GPU is around 33 deg C, and the CPU cores are at average 23.5 deg C (!!!!) It's astounding what the great SWIFTECH watercooling components,combined with ASUS Hybrid Phase and ASUS EPU-6 hardware/software,will do to cut the idle power consumption and idle temperatures.Again, I can say enough:Thanks to ASUS and my water cooling sponsor SWIFTECH,for their absolutely outstanding and efficient products!
After a last minute push, it is finished! :DI will call it: "White dwarf"A star that has blown off its outer excess mass, leaving only a very dense white-blue colored core.Likewise, my case design is devoid of all the bulk of regular computer cases,only leaving behind the dense powerful components packaged into a small volume, but with sufficient cooling to prevent it from going "supernova". ;)Quiet white LED fans gently let its presence be known.I didn't have time before the deadline to apply some vinyl or paint as I would have liked, but I did get the case finished to showcase my design concept and all of the components. If I make it to the next stage, I will definitely add the vinyl for my primary sponsors. Here is the case as it sits under the HDTV now,the front fans are 120mm fans, so you can see how small of a profile this computer is. Remember this system crams in a:ASUS P7P55 Premium ATX motherboard;ASUS GTX 260 GL+ video card (~11" long);Antec Quattro 850W ATX power supply;Swiftech complete watercooling system (XT CPU block, Komodo GPU Full cover block, MCR220 240mm Radiator with 4x 120mm fans in push-pull configuration, MCP350 pump with EK acrylic top, and MCRES reservoir),8x 128GB 2.5" SSD drives (one sponsored from Samsung):No need for any external buttons!- The ASUS TurboV Remote hanging on the upper right corner of the case can: Power on the computer,Choose one of three user-selectable overclocking presets (or underclocking for power savings), Adjust Bclk (bus speed/base clock frequency),and choose EPU mode (for power savings or maximum power for overclock)3/4 view sitting on my desk/test area:I'm not sure why the LED fans turned out Blue in this picture (maybe white balance?),they are actually 120mm white LED fans..Top view of the packaging of the components:Top view of the relative size/scale of the case, with your typical size magazine on top of the case-Side view of the relative size/scale of the case, with your typical 5.25" Bay DVD-ROM drive in front of the case-This picture shows how tight the actual packaging is in some places,here is a shot of (left to right) MCP350 water cooling pump, the G.Skill DDR3-2133 memory & sockets, 850W PSU, ASUS Blue and Chrome CPU VRM heatsinks, and the G.Skill 40mm memory kit LED fan that I moved to be on top of the VRM heatsinks to keep them cool.The tube going from left to right feeds directly into the Swiftech Apogee XT CPU waterblock. I'm actually kind of disappointed that you can't see the Swiftech Apogee XT block, that thing is dead sexy looking. But at least you can still see the nice blue and chrome ASUS VRM heatsinks on the P7P55D Premium motherboard.The PSU fits so tight on there, it actually sits on top of the 90 degree compression fittings coming out of the CPU water block.Its a bit hard to see in the previous picture, but look where the modular cables come out, and look at the G.Skill heatsinks. A bit of interference there, since the G.Skill heatsinks are kind of tall...So yeah, had to do some "modifications" to be able to use some of those PSU modular connectors.It fits as shown...but I actually ended up just cutting those extra fins off, although I don't have a picture of that.Some pictures of the acrylic case during fabrication,here is gluing the sides onto the front faceplate/radiator intake fan area:I used liquid Acrylic cement, which is actually a solvent that melts and fuses the acrylic pieces together. This cement makes for joints that are as strong as the base material,but you do need to make sure your edges fit together without very large gaps. Thanks to the guys at TAP plastics for giving me some pointers on acrylic fabrication. Cementing the rear plate (sitting on the floor) onto the rest of the pieces,note the cutouts for the I/O panel, expansion cards, and PSU exhaust fan, power cord, and power switch.
Added a little summary/running video of it in action:http://www.youtube.com/watch?v=SB2YDt2kdqoEnjoy!I sure hope I get chosen as a winner for stage 2!I think I already know what those stage 2 prizes will be ;)
I would love to see more pics of the inside if you could... especially around the PSU area... thx
"Never trust a computer you can't throw out a window."
Z77 GIGABYTE G1.SNIPER
G.Skill Ripjaws X 16gb PC2133
Asus Blu-ray burner
Seasonic X650 PSU
Patriot Pyro 128gb SSD
Paint:Added some gloss black spray paint for the front face area (which you will see in a Home theater environment), pardon the tape still on there that's being used for masking...looks like reflective 'piano black':
Her you can see the effect of putting gloss paint behind acrylic (painting the inside): Notice how the paint in the foreground is glossy piano black, in the background you can see the actual gloss black paint on the inside isn't as glossy,but the clear acrylic adds a ton of depth and gloss to some cheapo Pep Boys automotive spray paint:
Wire managementBeforeThis system has 8x 128GB SSDs in it, so the power and signal cabling can get kind of out of hand- the Antec stock SATA modular connectors used 3x cables and power connectors on the PSU to feed all 8 SSD drives:
AfterAdded some badly needed wire management;Swapped the longer SATA cables (maybe 18" long) for some short 8" SATA cables,Created a single modular PSU connector from the Antec modular connectors, feeds 8 SATA power connectors that are perfectly spaced so that they actually hold the SSDs together without any wire slack between them:
Front face look after painting:I put a piece of paper in front of the fans to mask the LED fans, simulating (light-wise) how it will look after I put the black mesh foam filter in there;It should have a back glow behind the filter, as well as some light seepage around the clear edges out of the bottom and top of the case. It will keep the case from being too bright in your face, while letting you know there's something powerful lurking in there:
I did some idle power consumption tests using the ASUS Softwares,using the Kill-a-watt power consumption meter (measures at the plug)
Baseline power consumption: 143 Watts
After adding EPU-6 (reduces Bclk and CPU voltage slightly more than Intel Speedstep):137 Watts
After turning T.Probe to power savings mode (uses 8 VRMs/voltage regulators under idle conditions, 32 VRMs under full load conditions):133 Watts
After installing Smart Doctor v5.49, allows EPU-6 to control the video card power as well:130 Watts
That's about a 9% decrease in idle power consumption, just from ASUS software tuning using the Xtreme Hybrid Design technologies.
So I come home tonight and I find out that I have gone and done it!
The White Dwarf case design has taken top honors for the ASUS Xtreme Design competition!!
This means that I have won a trip to CES 2010 in Las Vegas, and my system will be showcased at the ASUS booth at CES.
Great job to all of the other entrants on making some great designs.
After I heard the news last night, I was so excited that I stayed up until 5am working on the case again! Here's the changes I made: Reroute the water cooling loop, Clean up some of the cables/wires,Add some charcoal colored aluminum mesh filter material to the front intake port, Polish some minor scratches out of the acrylic.
Here's some more pictures of the White Dwarf system:
These pictures are all taken with the lid on, showing how optically clear acrylic can be:
Using the ASUS P7P55D Premium motherboard with SATA/6Gbps technology, I setup the system using 6 or 7 SSDs in RAID-0.Not including the faster Samsung SSD, which is being utilized on one of the SATA/6Gbps ports as a boot/OS drive.The system has surpassed 700 MB/sec in disk reads and 500 MB/sec in disk writes (albeit in slightly different setup/configuration).Asymmetrical/Software RAID:Onboard Hardware RAID:
Link to Nov. 11 entry:
TAKE BACK OFF TOPIC IGNORE NEWSBOT POSTS! Cooler Master HAF X - Thermaltake Toughpower W0178RU 850W - Gigabyte G1.Assassin - Intel Core i7 930 - Noctua NH-U12P SE2 - Kingston HyperX Red 1600 3X4GB - XFX 6850 - 2 X Samsung DVD SH-S223L - WD Caviar Black WD1001FALS 1TB - WD Caviar Black WD1002FAEX 1TB - Acer AL2216W - Tt eSports Challenger - Logitech MX 620 - Win 7 Pro x64
NEWS TIPS |
This site is intended for informational and entertainment purposes only. The contents are the views and opinion of the author and/or hisassociates. All products and trademarks are the property of their respective owners. All content and graphical elements areCopyright © 1999 - 2013 David Altavilla and HotHardware.com, LLC. All rights reserved. Privacy and Terms