Overclocking With Gigabyte Z77X Motherboards

8 thumbs up
The UP7 is reminiscent of Halloween. It sports a black-and-orange motif, and of the trio of mainboards we’re looking at here, this one is the flashiest in terms of both style and features. The heatsinks on the PCB feature “Thin Fin” technology, which is designed to facilitate better heat dissipation by dint of offering more surface area.

The UP7 has the same all-digital "3D Power" array of the other two Gigabyte boards, but it has a 32+3+2 power phase configuration. The large red power button is inexplicably far away from the tiny blue reset switch, but it’s right next to the CMOS switch. There’s also an LN2 switch for extreme overclockers as well as switches to toggle between BIOSes.

Brave souls can also make use of the overclocking buttons on board. The Gear button changes the base clock stepping by 0.1 MHz, while the two sets of +/- buttons raise or lower base clock and CPU ratio.


Gigabyte Z77X-UP7
Specifications & Features
CPU:

Chipset:

Memory:





Graphics:



Audio:

Connectivity:




Slots:



Storage:









USB 3.0:









Form Factor:
Support for Intel Core i7/i5/i3 and Pentium and Celeron processors in the LGA1155 package

Intel Z77 Express Chipset

4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
Dual channel memory architecture
Support for DDR3 2800(OC)/1600/1333/1066 MHz memory modules
Support for non-ECC memory modules
Support for Extreme Memory Profile (XMP) memory modules

Integrated Graphics Processor:
D-Sub, DVI-D (1920x1200), HDMI (1920x1200), DisplayPort (2560x1600)
Support for 4-Way/3-Way/2-Way AMD CrossFireX/NVIDIA SLI technology

Realtek ALC898 codec, High Definition Audio, 2/4/5.1/7.1-channel, Support for S/PDIF In/Out

Atheros GbE LAN chip (10/100/1000 Mbit) (LAN1)
Intel GbE LAN chip (10/100/1000 Mbit) (LAN2)
Wi-Fi 802.11 a/b/g/n, Supports 2.4/5 GHz Dual-Band
Bluetooth 4.0, 3.0+HS, 2.1+EDR

3 x PCI Express 3.0 x16 slots, running at x16
2 x PCI Express 3.0 x16 slots, running at x8
2 x PCI Express x1 slots

Chipset:
2 x SATA 6Gb/s connectors
4 x SATA 3Gb/s connectors
1 x mSATA connector
Support for RAID 0, RAID 1, RAID 5, and RAID 10

2 x Marvell 88SE9172 chips:
4 x SATA 6Gb/s connectors
Support for RAID 0 and RAID 1

Chipset:
Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
Up to 4 USB 2.0/1.1 ports (available through the internal USB headers)

VIA VL800 chip:
Up to 4 USB 3.0/2.0 ports on the back panel

Etron EJ168 chip:
Up to 2 USB 3.0/2.0 ports (available through the internal USB header)

E-ATX Form Factor; 30.5cm x 26.4cm 

The UP7 offers the same processor, memory, and display support as the other two motherboards (including seven expansion slots), but it also boasts support for up to 4-way CrossFire/SLI graphics. We should point out that three of those slots are PCI-E 3.0 x16 slots with x16 electrical connections, with two more at x8. There’s also a pair of PCI-E 2.0 x1 slots.

     

Like the other two boards’ SATA configurations, the chipset supports RAID 0, 1, 5, and 10 while a pair of Marvell chips delivers RAID 0 and 1 support. There are six total SATA 6Gbps connectors, four SATA 3Gbps connectors, and an onboard mSATA connector, too.

The chipset also provides a total of four USB 3.0 ports and four USB 2.0 ports while a VIA chip offers another four USB 3.0 and an Etron chip has another two. In addition to the aforementioned I/O ports, the back panel has a PS/2 port, optical S/PDIF, six audio jacks, and dual LAN ports.

     

Inside the box, it’s like Christmas. Gigabyte included the manual, utilities disc, I/O shield, and SATA cables as well as SLI and CrossFire bridges (up to four-way), a dual-eSATA and MOLEX power bracket, dual-USB 3.0 bracket, MOLEX-to-dual-SATA power adapter, pin header extenders, and a WiFi/Bluetooth 4.0 expansion card.
 

Article Index:

1 2 Next
0
+ -

Seems like the UP5 board is the best for price/preformance unless you need the features that the UD7 board but for the extra $150 it may not be worth it. I would want to see what a H100i or Thermaltake 2.0 extreme cooler could do with the chip on those boards and what their temps were. I know the H55 is a good budget AiO cooler but I don't know many people that would use it when trying to do some big overclocks in the 4.7-4.8 range.

0
+ -

Yeah Clixxer I agree but that typically seems to be the sweet spot in Gigabyte MB's. The 5's are awesome, the 7's are blown out , and any thing under 5 seems to be lacking to some degree to me. Just for reference here Gigabyte is and has been one of my favorite MB producers for 5+ years now so I have watched every series they put out. I also love there enhanced (double Copper) PCB's for added grounding, cooling, and resistance in construction.

0
+ -

After ABIT bit the dust I started using Gigabyte boards and after much research my next PC will be a Gigabyte. And I agree with both of ya the 5's seem to have the most bang for the buck.

0
+ -

I`ve been using gigabyte mobo`s for like 10 years and never had any mayor problems , so definitely they`ve got what it takes to stay on top , hopefully my new rig will also have some of their new and reliable board .

0
+ -

This is a good replacement motherboard for a broken PC. Its worth the upgrade!!Smile

0
+ -

I got a Gigabyte motherboard but is a motherboard really that important? I didnt spend much money on it because imo other things like CPU and GPU are way more important.

0
+ -

Dude MoBo is one of the most important things depending on what you are trying to build. SATA ports, USB ports, Overclocking, RAM speed, ect are all dependent on how good the mobo is.

0
+ -

Well i didn't overclock my PC at all yet.. Havent played any games i can run on 100% max and it has 2 usb 3.0 ports i think? But i dont have any USB 3.0 devices and also it costed me only 69 euro because it was in discount from 99 :)

0
+ -

Heh i'm all about getting a deal. I wasn't saying its a bad choice just that a motherboard can be very important depending on the type of build you are doing. 

0
+ -

A custom build i got Z68AP-D3 but when i overclock my stuff it stops working after a few days...

1 2 Next
Login or Register to Comment
Post a Comment
Username:   Password: