Obsidian Architecture: Corsair 700D / 800D Cases Reviewed

When we sat down to review Corsair's acclaimed 700D and 800D chassis, we couldn't help reflecting on how much the PC case market has evolved over the last decade. Ten years ago, when we were cutting our teeth on CPUs with code names like Coppermine and Thunderbird, enthusiast enclosures were few and far between. In a market that's now literally teeming with options from a variety of established manufacturers, however, how do Corsair's brushed-metal beauties measure up? Let's find out...

Obsidian Architecture: Corsair 700D / 800D Cases Reviewed


Via:  HotHardware
Comments
rapid1 4 years ago

Both of these cases are pretty, and also generally very functionally adept units it seem. One of the things I really like is the over sized pop out behind the processor. More and more cases have these now, but the size can be questionable as can the placing of them as I recently found out. While I love my Thermaltake Element S case which has really good airflow as well as over all functionality, I had an issue recently with this (when putting in a Megahalem). The spacing behind the CPU exists bit it unexplainably is a bit off center as well as a few millimeters smaller than needed. The reason I say this is not able to be explained is because the chassis fits a ATX MB. The sizing as well as placement of the CPU is pretty standard. This is especially true if you consider the fact that if they made it slightly larger it would both save them money (through less metal being used), and make it more widely useful for consumers/system builders. It would then fit everything up to extended ATX design with no issues as well as both AMD and INTEL CPU's no matter what. I really like these Corsair cases a lot, and would say if I were buying a case right now they would be my top candidate, although they are on the pricey side of things.

bob_on_the_cob 4 years ago

I really like both these cases, but that is a pretty penny to spend on a case.  A bit out of my usual case budget.

Joel H 4 years ago

The size of the popout is very handy. Not only can get you access to the CPU on most likely any motherboard, there's room enough for your hands and fingers to move.

bob_on_the_cob 4 years ago

[quote user="Joel H"]

The size of the popout is very handy. Not only can get you access to the CPU on most likely any motherboard, there's room enough for your hands and fingers to move.

[/quote]

Yeah I agree with you all about the cut out. Makes heatsink changes much easier, but how often do you really change heatsinks. I usually keep them longer than a motherboard.

Joel H 4 years ago

Bob,

 

In my line of work? Pretty often. ;)

animatortom 4 years ago
I really want one of these 800's! Yet I have always stuck to a policy that when building a computer that the case should not ever be more costly than one hundred dollars.
 
This is totally my style for a sleek looking workstation case with all the functionality. I just would like to see that if they are going to charge these prices, that they would also include a good 1000w power supply, multiple large fans, or something like an integrated water cooling system?
Joel H 4 years ago

Uh...lol? You're joking, right? The cheapest 1kW PSU from a company I've heard of and would personally trust (Antec) is $149 over at NewEgg. Multiple large fans are included--just not all the fans you could possibly ever use. But that's actually pretty minor, so sure, I'm all for Corsair tossing in a few more fans.

But the integrated water cooling system...that's a pretty tall order. Assuming that you mean something more along the lines of a Koolance Kit (http://www.koolance.com/water-cooling/product_info.php?product_id=564), that's a $294 product. Even if they offered a cut-rate version, we're talking $150-$200 of additional cooling hardware.

So what you're saying in a nutshell is that while you want a $200 case, you think it's a terrible deal unless you can buy $300-$450 worth of hardware for just $100.

Yeah...good luck with that.

Der Meister 4 years ago

Cool looking cases, and I must commend them on all the cable management holes in the back plate. 

rrplay 3 years ago

Always like the sleek look of these chassis from Corsair . They are quite flexible and easy to work in for the enthusiast and very adaptable for many configurations and easy to mod as well..sure a bit expensive solid and heavy but you get what you pay for with these chassis.

realneil 3 years ago

While I can appreciate the design and functionality of both of these cases, I shudder at the cost to get one of them. I’m sure that they’re WORTH the money, but in days like these, when people are unsure of their financial futures and things like the price of a gallon of fuel for the car weigh heavily on a lot of us, the usual Corsair price premium is harder to swallow.

I like to get a deal just like Tom does,….and while I’m not asking for free stuff, it’s worth it to me to do some research and power up my spending dollar.

Case in point, (no pun intended) the CoolerMaster Elite 430 Black. This is a full ATX and Micro-ATX compatible case that is sold at NewEgg for $49.00 with free shipping too. It has front and rear mounted LED 120mm fans included already, and has mounts for two more 120mm fans on the topside, one side-mounted 120mm fan, and also one on the bottom in front of the PSU. There is plenty of room for oversized CPU coolers and it fits a pair of Radeon 5970 video cards.

This case is easy on the eye, (very nice looking) and it’s painted all black inside. It has a tool-free design, water cooling holes if you so desire, with 7 expansion slots.

This is what $50 gets you.

rrplay 3 years ago

I agree that the Corsairs are a premium piecewise just part of my 'geek porn' fix that's  ooo sweet but way to much $$ for me

and saw some mods to share  in some ongoing threads in HH  that actually feature some useful & very affordable ideas to spice up a rig.

Come to think of it CM has that chassis in a May giveaway along with a new CM gal !She's fine too ! have like CM a lot they make great products, promote, and support them well and generously giveaway a lot of stuff to us.

take a look here http://hothardware.com/cs/forums/p/53604/395080.aspx#395080

&  CMHD.TV website

Smile

 

realneil 3 years ago

I have to admit it,...........if I was still working, making 40 bucks an hour with time and a half and double time for my extra hours, I would buy these Corsair cases. They're damn nice cases.

But they just don't fit in with my 'retired income realities', and the fact that retirement income doesn't ever go up with the cost of living index. To live within my means, I have to shop around, a lot.

rrplay 3 years ago

just wanted to share the link for convenience with Corsairs forums

http://forum.corsair.com/forums/forumdisplay.php?s=68d993decdd3a6c1caa4ae8521a058c2&f=174 

  easy to get some ideas of what may be do-able with what they have or build.for others that have the means.

Still a nice way to spend a bit of time in the gallery / mod etc and get your 'fix' .

 

Post a Comment
or Register to comment