Lancool Introduces Three New PC Cases
Lancool announced three new mid-tower cases, all of which feature anti-vibration, tool-free installations as well as black steel exteriors. The new PC-K63 features a transparent side panel and blue LEDs to illuminate the two 140mm front panel fans and the 120mm rear panel fan. This case also has two 140mm top panel fans.
Lancool’s new PC-K59 and PC-K63 cases support ATX, Micro-ATX, and Mini-ITX motherboards. These cases also offer six 3.5-inch and four 2.5-inch hard drive bays and room for graphics cards up to 285mm long. Both drives also accept three 5.25-inch optical drives.
The new PC-K57 case from Lancool can accept three 5.25-inch optical drives, three 3.5-inch hard drives, and two 2.5-inch hard drives. This case also has room for VGA cards up to 415mm in length. ATX, Micro-ATX, and Mini-ITX motherboards are all compatible with this case.
Lancool Releases Three New PC Cases At Once
First Knight Series: The PC-K57, the PC-K59, and the PC-K63
19 January 2011, Keelung, Taiwan – Lancool, maker of mid to high-end computer chassis for over twenty years, has launched three, new, mid-tower PC cases: the PC-K57, the PC-K59, and the PC-K63. Utilizing their affiliation with high-end chassis manufacturer Lian-Li, Lancool has designed all three of these PC cases with anti-vibration, tool-less installations of components, all-black SECC steel exteriors, and superior thermal performance capabilities, while providing exceptional aesthetic appeal.
The extremely sexy PC-K63's blacked-out interior is visible through a transparent side-panel window. Blue LEDs illuminate the PC-K63's two 140mm front panel fans as well as the 120mm rear panel fan. Two, top panel 140mm fans improve airflow inside the PC-K63 as well.
PC-K59 & PC-K63
Users can mount ATX, Micro-ATX, and Mini-ITX motherboards in Lancool's new PC-K59 and PC-K63. Six 3.5” and four 2.5” HDDs (internal) can be mounted without tools, as well as graphics cards up to 285mm long. Both chassis also accept three 5.25” ODDs (external), mounted on the front panel with no tools needed. Air-filters in front of two 140mm front panel fans ensure users' equipment is protected from heat and dust. Both chassis also include one 120mm exhaust fan located at the top of the rear panel.
Tool-less installation of three 5.25” ODDs (external), three 3.5” HDDs (internal), and two 2.5” HDDs (internal), as well as PCI slots allowing VGA cards up to 415mm long make this an excellent PC case for gamers and enthusiasts alike. ATX, Micro-ATX, and Mini-ITX motherboards are all compatible in the PC-K57. One 140mm intake fan on the front panel (with air-filter for dust-protection) and one 120mm exhaust fan, located at the top of the rear panel, keep modified components from over-heating. For users who prefer, the PC-K57 has an additional 140mm front panel fan mount (fan excluded). With a unique front panel design, reminiscent of medieval armor, Lancool's PC-K57 looks every bit as good on the outside as it does on the inside.
Specialty Side Panel
On the side panel of the PC-K59 and PC-K57 there is venting directly over the CPU. Behind the venting, on the inside of the chassis, is a protective cover with four pop-off sections, allowing for one or two, 140mm or 120mm, fans to be mounted. If fans are not desired, the protective pop-off panel can be kept in place to keep dust from entering the chassis.
All three chassis include eight tool-less PCI expansion slots, a cable management clasp running from the top of the case to bottom for increased organization, an air-filtered vent directly below the PSU (tool-less mount at the base of the case) to aid airflow, two rubber-lined holes on the back panel enabling LCS, one USB 3.0 port, one USB 2.0 port, and HD Audio ports. An e-SATA port is also included on the PC-K59 and PC-K63. The dimensions of the PC-K59 and the PC-K63 stand at 215mm x 530mm x 530mm (W, H, D) while the dimensions of the PC-K57 are 210mm x 472mm x 505mm (W, H, D).