Introduction and Specifications
Between then and now, however, OCZ has tended to the Vertex 4 SSD line by upgrading its firmware. On the pages ahead we’ll get a gander at how the updated 128GB OCZ Vertex 4 stacks up against other drives with similar capacities and see if it can demonstrate a greater performance enhancement over the competition than the 256GB and 512GB versions did. We’ll also check in on how (or if) pricing has changed over the last few months; in April, the Vertex 4s were going for about $1.47 per GiB, which put them right around of the middle of the competition in terms of cost.
First, though, let’s have a look at the 128GB OCZ Vertex 4’s specs.
OCZ Vertex 4 SSD 128GB
Before the firmware update, the 128GB Vertex 4 was rated for 535MBps/200MBps read/write times, but now OCZ promises 560MBps/430MBps performance; that’s a huge leap forward (more than double) for the SSD’s write performance. The 128GB Vertex 4 also features 90,000/85,000 random 4k read/write IOPS, with a maximum of 120,000 IOPS and a SATA III (6Gbps) interface.
TRIM support to keep the accumulated write clutter to a minimum and subsequently maintain performance.
Indilinx logos, while the back has a brushed metal finish and all the detailed product information.
A closer look at the actual PCB reveals the same Indilinx Everest 2 (IDX400M00-BC) controller we saw in the 256GB and 512GB Vertex 4s, which supports up to 8 channels and 16-way Interleaving (and lacks the compression limitations found in the SandForce controllers OCZ previously used in some of its SSDs.)
The actual NAND and DRAM chips are different; the 128GB version of the Vertex 4 has sixteen Intel 25nm 8GB synchronous MLC flash chips (29F64G08ACME2), and eight each are stamped on the top and bottom of the PCB. That happens to be the same NAND that OCZ used in the 128GB Vertex 3 SSDs. This SSD also has 1GB of DRAM courtesy of a pair of Micron.